Used Diesel Guide Drivers Cummins Mack International Detroit

Lot of Valve Guide Drivers used for installing Valve Guides in Diesel Cylinder Heads.  

Used Pneumatic / Air Hammer Valve Guide Driver Lot

Lot of Valve Guide Drivers used for removing and installing Valve Guides in Cylinder Heads.  

Used Skil - Black & Decker - Snap On Valve Seat Grinder Driver - 5/8 Hex

Used Skil Model 318 Valve Seat Grinder Drive Motor.  13,000 RPM (perfect for small seat) 5/8" Hex drive Runs perfect, looks to have been used very little.  This is compatible with Snap On, Blue...

Used Sunnen Junior Small Engine Cylinder Hone - JN95

Used JN-95 Sunnen Portable Small Engine Cylinder Hone.This hone has a range of 2" to 2.6" (50.8mm to 66mm) depending on the stone sets used. 

Used Sunnen TN-111 Vee Block Fixture TN-46

Used Sunnen TN-111 Rod Aligner Vee Block Fixture for checking rods with the piston mounted on the connecting rod. Part Number TN-46 

Used Valve Spring Compressor - Snap On Cam Lock

Used Snap On VL-30 Cam Lock Valve Spring Compressor

Van Norman 777, 900, 905, 965 Boring Bar Micrometer - 7377

Very Nice Used OEM Micrometer for a Van Norman the Model 777, 900, 905, and 965 Portable Boring Bars.  *The Micrometer will need to be calibrated to your specific boring bar.*  Part Number: 7377

Van Norman 777-S and S4 Boring Bar Micrometer 13560

Used OEM Micrometer for a Van Norman Model 777-S and 777-S4 Portable Boring Bar.  *The Micrometer will need to be calibrated to your specific boring bar.*  Part Number: 13560

VDI 40 1-1/4" Boring Bar Tool Holder E2-40X1-1/4

VDI 40 1-1/4" Boring Bar Lathe Tool Holder.  Lathe has been sold and we do not use VDI tool holders in any of our other machines.

VDI 40 Boring Bar Holder ER32 Used Once