null

Used Machines

Used Engine Rebuilding Equipment 

  • Cylinder Head Bench Mount / Cradle

    Cylinder Head Bench Mount / Cradle

    Used Cylinder Head Cradle  Measures 41" Oveall Length Can fit 31" Long Head in the cralde.  Great for Valve seat grinding and or Port work.   

    $150.00
  • Geo Olcott Flywheel Grinder

    Geo Olcott Flywheel Grinder

    Used Geo Olcott Flywheel Grinder 220v Single Phase Power Column Tested before removal. Everything worked as it should.  Shipping via freight and will be buyers responsibility. We can load on trailer or truck if it is picked up locally.   

    $3,500.00
    Add to Cart
  • Sioux 710 Parts Tumbler

    Sioux 710 Parts Tumbler

    Used Sioux 710 Parts Tumbler In good working condition.  New Gear on basket and drive, Gear Lash Adjusted, and New Bearings on Basket. Basket is in decent shape. Timer works as well as safety limit switch. It's ready to go. Just needs tumbling media...

    $1,000.00
    Add to Cart
  • Sunnen CRG-750 Rod and Cap Grinder

    Sunnen CRG-750 Rod and Cap Grinder

    SOLD 12-01-2022 Used Sunnen CRG-750 Rod and Cap Grinder   Shipping via freight and will be buyers responsibility. We can load on trailer or truck if it is picked up locally.   

    $1,000.00
  • Used Arnold Connecting Rod Gauge - Sunnen AG300

    Used Arnold Connecting Rod Gauge - Sunnen AG300

    Used Arnold connecting rod gauge. This is a alternative to the Sunnen AG-300 gauge and has a few benefits like not needing any different centering finger set to go from .690 to 4.740". This is a high end gauge. Arnold Gauge is known for crankshaft...

    $1,000.00
    Add to Cart
  • SALE
    Used Sioux 685L Automatic Valve Grinder

    Used Sioux 685L Automatic Valve Grinder

    Sioux 685L Automatic Valve Grinder.  Fully Automatic. The stone sweeps side to side and will feed valve into the stone automatically. Stone stroke width is adjustable, feed amount is adjustable and has a stop, and Stone dresser is built in so you...

    Was: $1,500.00
    Now: $1,050.00
    Add to Cart
  • Van Norman 777-S Boring Bar

    Van Norman 777-S Boring Bar

    SALE PENDING 11-17-2022   Used Van Norman 777-S Boring Bar and Tool Kit This was checked to make sure is runs in High Gear, Low Gear, Feeds, and centering fingers go all the way out and back in. Also no broken tabs on the back of the centering shoes...

    $2,200.00