Black & Decker Pilot Wrench 19829 Possibly NOS

Black and Decker Pilot Installation and Removal Tool. Looks to be New old Stock.   Black & Decker Part Number 19829

Blue Point - Black & Decker Type B, 55 Degree Valve Seat Grinder Driver

Used Blue Point Type 4 Valve Seat Grinder Drive Motor. Will work with Black & Decker, Skil, and Snap On seat grinder sets that use the 5/8 Hex Drive.  55 Degree head 12,000 RPM 5/8" Hex drive Runs...

Cylinder Hone Filter - 442

Cylinder Hone Filter 20" Long by 2-1/2" Diameter.  

Dorian Tool MT5 Live Center In New Condition(Installed Never Used)

Kent Moore J-33421 Detroit Diesel 2 Cycle Cam Follower Service Tool

Used Kent Moore Cam Follower Service tool. See pictures for condition and what is included.  The 2 small Bushings / Spacers are part numbers J-33421-3 AND J-33421-22  below is the AI description on...

Lisle Heavy Duty Master Model Cylinder Ridge Reamer

Used Lisle Heavy Duty Ridge Reamer. Everything looks to be in good condition including the Cutting bit. This is a nice heavy cast iron unit. 

New Kennametal Kenloc Metal Lathe Boring Head H32NEL4W

New Sandvik Coromant Metal Lathe Boring Head C5-CRSNL-35060-121D

NOS - Flywheel Grinder Centering Cone 2" to 2-3/4"

NOS Flywheel Grinder Centering Cone 2" to 2-3/4" Range 1-1/2" Center Hole.  5/8" Thick

NOS - Flywheel Grinder Centering Cone 2-5/8" to 3-1/4"

NOS Flywheel Grinder Centering Cone 2-5/8" to 3-1/4" Range 1-1/2" Center Hole.  5/8" Thick

NOS - Flywheel Grinder Centering Cone 4-1/8" to 4-3/4"

NOS Flywheel Grinder Centering Cone 4-1/8" to 4-3/4" Range 1-1/2" Center Hole.  5/8" Thick

NOS - Sunnen B-122 Reducing Ring

Used Sunnen Reducing ring for the Sunnen B500 Piston Pin Installer Kit Still in original package  Part Number B-122

NOS - Sunnen CK-3050 Extension Master Holder - Single

New Old Stock Shoe Holder. Single item as pictured.  Sunnen Part Number CK-3050 

NOS - Sunnen CK-4045A Extension Master Holder Set

New Old Stock Master Holder Extension Set. 

NOS 12mm KO Lee Split Style Valve Seat Grinder Pilot P8472

Offered here is a 12MM  KO Lee Split Style Valve Seat Grinder Pilot. The top diameter is 3/8.

NOS 13/32" Split Style Valve Seat Grinder Pilot for Kwik Way (.437 Top) P97-KW

13/32" Split Pilot with a .437 Top for use with Kwik Way Valve Grinders. This was manufactured by KO Lee but is for use with a Kwik Way valve seat grinder set. 

NOS Winfield Fixture End Plates

New Old Stock Windfield Surfacer Fixture End Plates. Limited quantity available. 

Storm Vulcan Model 15 Crankshaft Grinder Wheel Hub

Storm Vulcan Model Crankshaft Grinder Drive Post Set

Used Drive Post Set for Storm Vulcan Crankshaft Grinder. I believe its from a Model 15  

Storm Vulcan Model Crankshaft Grinder Short Y Driver 146-12B

Used Y Driver for Storm Vulcan Crankshaft Grinder. I believe its from a Model 15  

Storm Vulcan Model Crankshaft Grinder Spring Loaded Drive Post

Used Spring Loaded Drive Post for Storm Vulcan Crankshaft Grinder. I believe its from a Model 15 Special

Storm Vulcan Model Crankshaft Grinder Spring Loaded Drive Post.

Used Spring Loaded Drive Post for Storm Vulcan Crankshaft Grinder. I believe its from a Model 15

Storm Vulcan Model Crankshaft Grinder Spring Loaded Drive Post..

Used Spring Loaded Drive Post for Storm Vulcan Crankshaft Grinder. I believe its from a Model 15

Storm Vulcan Model Crankshaft Grinder Y Driver 146-12B

Used Y Driver for Storm Vulcan Crankshaft Grinder. I believe its from a Model 15  

Storm Vulcan Model Crankshaft Grinder Y Driver 146-12B..

Used Y Driver for Storm Vulcan Crankshaft Grinder. I believe its from a Model 15  

Used - Model RR-50 Cylinder Ridge Reamer

Used Ridge Reamer. Everything looks to be in good condition.  Brand Unknown Made in the USA

Used - Winona Van Norman PH6000 Drive Arbor #4 Morse Taper

Used Arbor from a Winona Van Norman PH6000 Seat and Guide Machine. Used for Winona Core Drills and Reamers.   Part # WSC9600 ??

USED - 5/8" (.625) Pilots - Sioux - Kwik Way

Used Valve Guide Pilots with 5/8" Top Select available Pilots from the drop down list. 

USED - Black and Decker Valve Seat Grinder Stones Assortment

Lot of Used Stones for Black and Decker Valve Seat Grinders. The price is for all 12 stones. Most are like new and they are gray stones even though the picture hue makes them look brown. The sizes...

USED - Black and Decker Valve Seat Grinder Stones Assortment

Lot of Used Stones for Black and Decker Valve Seat Grinders. The price is for all 23 stones. Most are like new and they are gray stones even though the picture hue makes them look brown. The sizes...

Used - Diesel Injector Timing Tool

Used Diesel Injector Timing tool?? Not sure of the brand or what engine it is for so its priced to sell.   

Used - Flex Hone - Cylinder Hone - Deglaze 3-1/4" Diameter

Used 3-1/4" Flex Cylinder Hone. 

Used - Flex Hone - Cylinder Hone - Deglaze 4" Diameter

Used 4" Flex Cylinder Hone. 

Used - Flex Hone - Cylinder Hone - Deglaze 4-1/2" Diameter

Used 4-1/2" Flex Cylinder Hone. 

Used - Flex Hone - Cylinder Hone - Deglaze 5-1/2" Diameter

Used 5-1/2" Flex Cylinder Hone. 

Used - Flywheel Grinder Centering Cone 2-5/8" to 3-1/4"

USED - Flywheel Grinder Centering Cone 2-5/8" to 3-1/4" Range 1-1/2" Center Hole.  5/8" Thick

Used - Hall Toledo Valve Seat Grinder Pilot - Flat Head Ford

1 Used Hall Toledo Flat Head Ford Pilot Marked Ford-40. This is a 7/16" pilot and measures 1-1/32" on the top and 1" on the bottom portion that fits into the block. 

Used - K-D No 380 Valve Spring Compressor

Used K-D No 380 Valve Spring Compressor.       

USED - KO Lee Split Style Valve Seat Grinder Pilots 3/8 top

Used KO Lee Split Style Valve Guide Pilots with 3/8 Top Diameter Select available Pilots from the drop down list. Each one has a picture of the actual pilot you will get. 

Used - Manual KLine 11/32" Valve Guide Liner Installer Tool

Used Kline 11/32 Guide Liner Installer Tool. This is the old style.

Used - Old Style 3/8 KLine Valve Guide Liner Installation Kit

Used Kline 3/8 Old Style Guide Liner Kit with 2 step core drill them ream setup. It has one reamer which is .373, the trimming tool, the old style guide bushing, and the liner installer.  

Used - Sunnen AN241 12" Portable Hone Extension

Used - Sunnen Portable Cylinder Hone 12" Drive Extension Part Number: AN-241

Used - Sunnen LN-0116 Mandrel Eccentric Sleeve / Bushing

Used Sunnen LN-0116 Eccentric Sleeve

Used - Sunnen Portable Cylinder Hone Tool Box

Used Sunnen Portable Cylinder Hone Tool Box. Was for a SN-75 Midget hone originally but is the same box used for a AN-111, AN-112, JN-95 Junior and others. 

Used - Sunnen Portable Cylinder Hone Tool Box

Used Sunnen Portable Cylinder Hone Tool Box. Same box used for a AN-111, AN-112, JN-95 Junior, SN-75 and others. 

Used - Thor Valve Seat Grinder Tool Box

Used Thor Valve Seat Grinder Tool Box. 

Used - Van Norman Boring Bar Anchor Bolt 2-5/8 x 3/8

Boring Bar Hold Down Bolt Overall Length is 2-5/8" Threads are 3/8" Coarse Thread Head Diameter is @ 1-1/16" and Thickness is  .360"

Used - ZIM Valve Seat Lapping Tool

Used ZIM Valve Seat Lapping Tool. 

Used 5 to 1 Valve Guide Reamer and Knurl Speed Reducer

Used Speed Reducer for running Valve Guide Reamers and Valve Guide Knurls with 1/4 inch Square Female Drive. 

Used Black & Decker Type D Seat Grinder Stone Dresser

Used Black & Decker Valve Seat Grinder Stone Dresser