sku: BE-632500 Allen Head Screw MSRP: Now: $1.07 Add to Cart Compare sku: BE-1119 BE-1119 - Indexable Boring Bar Bit MSRP: Now: $7.25 Add to Cart Compare sku: BE-1120 BE-1120 - Indexable Boring Bar Bit Negative Rake MSRP: Now: $7.72 Add to Cart Compare sku: BE-1120HD BE-1120HD - Indexable Boring Bar Bit MSRP: Now: $8.94 Add to Cart Compare sku: BE-2119 BE-2119 - Indexable Boring Bar Bit MSRP: Now: $9.30 Add to Cart Compare sku: BE-8101 BE-8101 - Indexable Boring Bar Bit MSRP: Now: $9.18 Add to Cart Compare sku: BE-8101CBN BE-8101CBN - Indexable Boring Bar Bit MSRP: Now: $49.84 Compare sku: BE-440375 Flat Head Screw 4-40 MSRP: Now: $0.75 Add to Cart Compare sku: BE-632375 Flat Head Screw 6-32 MSRP: Now: $0.89 Add to Cart Compare sku: KWC Kwik Way Counter Bore Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: KWF Kwik Way Finishing Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: KWR Kwik Way Roughing Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: RO1C Rottler Boring Bar - Counter Boring / Sleeve Trimming MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-1/4 Rottler Boring Bar Bit 1-1/4"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-3/4 Rottler Boring Bar Bit 1-3/4"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-7/16 Rottler Boring Bar Bit 1-7/16"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: BE-M3X10 Torx Head Screw M3 X 10 MSRP: Now: $0.89 Add to Cart Compare sku: VS2 Van Norman Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare sku: VS100 Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars MSRP: Now: $34.32 Add to Cart Compare sku: VS360 Van Norman Boring Bar Bit for the 888 & 999 Boring Bar MSRP: Now: $57.30 Add to Cart Compare sku: VS3 Van Norman Counter Bore Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare Allen Head Screw Fits most Tool Holder with BE-1119 cutter tips MSRP: Now: $1.07 Add to Cart Compare BE-1119 - Indexable Boring Bar Bit BE-1119Positive Rake bit for use with Counter Bore / Sleeve Trimming and Cylinder Chamfering Tool Holders MSRP: Now: $7.25 Add to Cart Compare BE-1120 - Indexable Boring Bar Bit Negative Rake BE-1120Premium Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $7.72 Add to Cart Compare BE-1120HD - Indexable Boring Bar Bit BE-1120HD Multi-Coated Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $8.94 Add to Cart Compare BE-2119 - Indexable Boring Bar Bit BE-2119Positive Rake bit with 3 cutting tips for use with VN-999 Tool Holders MSRP: Now: $9.30 Add to Cart Compare BE-8101 - Indexable Boring Bar Bit BE-8101Premium Carbide Positive Rake Bit for tooling that uses a positive rake cutter tip.Used on Blind Hole and some Cylinder Boring Tool Holders. MSRP: Now: $9.18 Add to Cart Compare BE-8101CBN - Indexable Boring Bar Bit CBN Tipped Positive Rake Bit for tooling that uses a positive rake cutter tip. CBN is second in hardness to diamond and can withstand extremely high temperatures making it long lasting verses carbide. The BE-8101 insert is used on Blind Hole Tool Holders... MSRP: Now: $49.84 Compare Flat Head Screw 4-40 Flat Head Screw for KW-1474 Tool Holder MSRP: Now: $0.75 Add to Cart Compare Flat Head Screw 6-32 Flat Head Screw for Most tooling that uses the BE-1120 and most tooling that uses the BE-8101 Cutter Tips These will NOT work on tolling with .2 on the end of the part number. For example, Part Number VN-1135 takes this screw. Part number VN-1135.2 does... MSRP: Now: $0.89 Add to Cart Compare Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
sku: BE-1119 BE-1119 - Indexable Boring Bar Bit MSRP: Now: $7.25 Add to Cart Compare sku: BE-1120 BE-1120 - Indexable Boring Bar Bit Negative Rake MSRP: Now: $7.72 Add to Cart Compare sku: BE-1120HD BE-1120HD - Indexable Boring Bar Bit MSRP: Now: $8.94 Add to Cart Compare sku: BE-2119 BE-2119 - Indexable Boring Bar Bit MSRP: Now: $9.30 Add to Cart Compare sku: BE-8101 BE-8101 - Indexable Boring Bar Bit MSRP: Now: $9.18 Add to Cart Compare sku: BE-8101CBN BE-8101CBN - Indexable Boring Bar Bit MSRP: Now: $49.84 Compare sku: BE-440375 Flat Head Screw 4-40 MSRP: Now: $0.75 Add to Cart Compare sku: BE-632375 Flat Head Screw 6-32 MSRP: Now: $0.89 Add to Cart Compare sku: KWC Kwik Way Counter Bore Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: KWF Kwik Way Finishing Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: KWR Kwik Way Roughing Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: RO1C Rottler Boring Bar - Counter Boring / Sleeve Trimming MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-1/4 Rottler Boring Bar Bit 1-1/4"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-3/4 Rottler Boring Bar Bit 1-3/4"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-7/16 Rottler Boring Bar Bit 1-7/16"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: BE-M3X10 Torx Head Screw M3 X 10 MSRP: Now: $0.89 Add to Cart Compare sku: VS2 Van Norman Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare sku: VS100 Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars MSRP: Now: $34.32 Add to Cart Compare sku: VS360 Van Norman Boring Bar Bit for the 888 & 999 Boring Bar MSRP: Now: $57.30 Add to Cart Compare sku: VS3 Van Norman Counter Bore Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare Allen Head Screw Fits most Tool Holder with BE-1119 cutter tips MSRP: Now: $1.07 Add to Cart Compare BE-1119 - Indexable Boring Bar Bit BE-1119Positive Rake bit for use with Counter Bore / Sleeve Trimming and Cylinder Chamfering Tool Holders MSRP: Now: $7.25 Add to Cart Compare BE-1120 - Indexable Boring Bar Bit Negative Rake BE-1120Premium Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $7.72 Add to Cart Compare BE-1120HD - Indexable Boring Bar Bit BE-1120HD Multi-Coated Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $8.94 Add to Cart Compare BE-2119 - Indexable Boring Bar Bit BE-2119Positive Rake bit with 3 cutting tips for use with VN-999 Tool Holders MSRP: Now: $9.30 Add to Cart Compare BE-8101 - Indexable Boring Bar Bit BE-8101Premium Carbide Positive Rake Bit for tooling that uses a positive rake cutter tip.Used on Blind Hole and some Cylinder Boring Tool Holders. MSRP: Now: $9.18 Add to Cart Compare BE-8101CBN - Indexable Boring Bar Bit CBN Tipped Positive Rake Bit for tooling that uses a positive rake cutter tip. CBN is second in hardness to diamond and can withstand extremely high temperatures making it long lasting verses carbide. The BE-8101 insert is used on Blind Hole Tool Holders... MSRP: Now: $49.84 Compare Flat Head Screw 4-40 Flat Head Screw for KW-1474 Tool Holder MSRP: Now: $0.75 Add to Cart Compare Flat Head Screw 6-32 Flat Head Screw for Most tooling that uses the BE-1120 and most tooling that uses the BE-8101 Cutter Tips These will NOT work on tolling with .2 on the end of the part number. For example, Part Number VN-1135 takes this screw. Part number VN-1135.2 does... MSRP: Now: $0.89 Add to Cart Compare Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
sku: BE-1120 BE-1120 - Indexable Boring Bar Bit Negative Rake MSRP: Now: $7.72 Add to Cart Compare sku: BE-1120HD BE-1120HD - Indexable Boring Bar Bit MSRP: Now: $8.94 Add to Cart Compare sku: BE-2119 BE-2119 - Indexable Boring Bar Bit MSRP: Now: $9.30 Add to Cart Compare sku: BE-8101 BE-8101 - Indexable Boring Bar Bit MSRP: Now: $9.18 Add to Cart Compare sku: BE-8101CBN BE-8101CBN - Indexable Boring Bar Bit MSRP: Now: $49.84 Compare sku: BE-440375 Flat Head Screw 4-40 MSRP: Now: $0.75 Add to Cart Compare sku: BE-632375 Flat Head Screw 6-32 MSRP: Now: $0.89 Add to Cart Compare sku: KWC Kwik Way Counter Bore Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: KWF Kwik Way Finishing Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: KWR Kwik Way Roughing Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: RO1C Rottler Boring Bar - Counter Boring / Sleeve Trimming MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-1/4 Rottler Boring Bar Bit 1-1/4"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-3/4 Rottler Boring Bar Bit 1-3/4"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-7/16 Rottler Boring Bar Bit 1-7/16"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: BE-M3X10 Torx Head Screw M3 X 10 MSRP: Now: $0.89 Add to Cart Compare sku: VS2 Van Norman Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare sku: VS100 Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars MSRP: Now: $34.32 Add to Cart Compare sku: VS360 Van Norman Boring Bar Bit for the 888 & 999 Boring Bar MSRP: Now: $57.30 Add to Cart Compare sku: VS3 Van Norman Counter Bore Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare Allen Head Screw Fits most Tool Holder with BE-1119 cutter tips MSRP: Now: $1.07 Add to Cart Compare BE-1119 - Indexable Boring Bar Bit BE-1119Positive Rake bit for use with Counter Bore / Sleeve Trimming and Cylinder Chamfering Tool Holders MSRP: Now: $7.25 Add to Cart Compare BE-1120 - Indexable Boring Bar Bit Negative Rake BE-1120Premium Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $7.72 Add to Cart Compare BE-1120HD - Indexable Boring Bar Bit BE-1120HD Multi-Coated Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $8.94 Add to Cart Compare BE-2119 - Indexable Boring Bar Bit BE-2119Positive Rake bit with 3 cutting tips for use with VN-999 Tool Holders MSRP: Now: $9.30 Add to Cart Compare BE-8101 - Indexable Boring Bar Bit BE-8101Premium Carbide Positive Rake Bit for tooling that uses a positive rake cutter tip.Used on Blind Hole and some Cylinder Boring Tool Holders. MSRP: Now: $9.18 Add to Cart Compare BE-8101CBN - Indexable Boring Bar Bit CBN Tipped Positive Rake Bit for tooling that uses a positive rake cutter tip. CBN is second in hardness to diamond and can withstand extremely high temperatures making it long lasting verses carbide. The BE-8101 insert is used on Blind Hole Tool Holders... MSRP: Now: $49.84 Compare Flat Head Screw 4-40 Flat Head Screw for KW-1474 Tool Holder MSRP: Now: $0.75 Add to Cart Compare Flat Head Screw 6-32 Flat Head Screw for Most tooling that uses the BE-1120 and most tooling that uses the BE-8101 Cutter Tips These will NOT work on tolling with .2 on the end of the part number. For example, Part Number VN-1135 takes this screw. Part number VN-1135.2 does... MSRP: Now: $0.89 Add to Cart Compare Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
sku: BE-1120HD BE-1120HD - Indexable Boring Bar Bit MSRP: Now: $8.94 Add to Cart Compare sku: BE-2119 BE-2119 - Indexable Boring Bar Bit MSRP: Now: $9.30 Add to Cart Compare sku: BE-8101 BE-8101 - Indexable Boring Bar Bit MSRP: Now: $9.18 Add to Cart Compare sku: BE-8101CBN BE-8101CBN - Indexable Boring Bar Bit MSRP: Now: $49.84 Compare sku: BE-440375 Flat Head Screw 4-40 MSRP: Now: $0.75 Add to Cart Compare sku: BE-632375 Flat Head Screw 6-32 MSRP: Now: $0.89 Add to Cart Compare sku: KWC Kwik Way Counter Bore Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: KWF Kwik Way Finishing Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: KWR Kwik Way Roughing Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: RO1C Rottler Boring Bar - Counter Boring / Sleeve Trimming MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-1/4 Rottler Boring Bar Bit 1-1/4"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-3/4 Rottler Boring Bar Bit 1-3/4"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-7/16 Rottler Boring Bar Bit 1-7/16"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: BE-M3X10 Torx Head Screw M3 X 10 MSRP: Now: $0.89 Add to Cart Compare sku: VS2 Van Norman Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare sku: VS100 Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars MSRP: Now: $34.32 Add to Cart Compare sku: VS360 Van Norman Boring Bar Bit for the 888 & 999 Boring Bar MSRP: Now: $57.30 Add to Cart Compare sku: VS3 Van Norman Counter Bore Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare Allen Head Screw Fits most Tool Holder with BE-1119 cutter tips MSRP: Now: $1.07 Add to Cart Compare BE-1119 - Indexable Boring Bar Bit BE-1119Positive Rake bit for use with Counter Bore / Sleeve Trimming and Cylinder Chamfering Tool Holders MSRP: Now: $7.25 Add to Cart Compare BE-1120 - Indexable Boring Bar Bit Negative Rake BE-1120Premium Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $7.72 Add to Cart Compare BE-1120HD - Indexable Boring Bar Bit BE-1120HD Multi-Coated Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $8.94 Add to Cart Compare BE-2119 - Indexable Boring Bar Bit BE-2119Positive Rake bit with 3 cutting tips for use with VN-999 Tool Holders MSRP: Now: $9.30 Add to Cart Compare BE-8101 - Indexable Boring Bar Bit BE-8101Premium Carbide Positive Rake Bit for tooling that uses a positive rake cutter tip.Used on Blind Hole and some Cylinder Boring Tool Holders. MSRP: Now: $9.18 Add to Cart Compare BE-8101CBN - Indexable Boring Bar Bit CBN Tipped Positive Rake Bit for tooling that uses a positive rake cutter tip. CBN is second in hardness to diamond and can withstand extremely high temperatures making it long lasting verses carbide. The BE-8101 insert is used on Blind Hole Tool Holders... MSRP: Now: $49.84 Compare Flat Head Screw 4-40 Flat Head Screw for KW-1474 Tool Holder MSRP: Now: $0.75 Add to Cart Compare Flat Head Screw 6-32 Flat Head Screw for Most tooling that uses the BE-1120 and most tooling that uses the BE-8101 Cutter Tips These will NOT work on tolling with .2 on the end of the part number. For example, Part Number VN-1135 takes this screw. Part number VN-1135.2 does... MSRP: Now: $0.89 Add to Cart Compare Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
sku: BE-2119 BE-2119 - Indexable Boring Bar Bit MSRP: Now: $9.30 Add to Cart Compare sku: BE-8101 BE-8101 - Indexable Boring Bar Bit MSRP: Now: $9.18 Add to Cart Compare sku: BE-8101CBN BE-8101CBN - Indexable Boring Bar Bit MSRP: Now: $49.84 Compare sku: BE-440375 Flat Head Screw 4-40 MSRP: Now: $0.75 Add to Cart Compare sku: BE-632375 Flat Head Screw 6-32 MSRP: Now: $0.89 Add to Cart Compare sku: KWC Kwik Way Counter Bore Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: KWF Kwik Way Finishing Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: KWR Kwik Way Roughing Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: RO1C Rottler Boring Bar - Counter Boring / Sleeve Trimming MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-1/4 Rottler Boring Bar Bit 1-1/4"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-3/4 Rottler Boring Bar Bit 1-3/4"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-7/16 Rottler Boring Bar Bit 1-7/16"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: BE-M3X10 Torx Head Screw M3 X 10 MSRP: Now: $0.89 Add to Cart Compare sku: VS2 Van Norman Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare sku: VS100 Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars MSRP: Now: $34.32 Add to Cart Compare sku: VS360 Van Norman Boring Bar Bit for the 888 & 999 Boring Bar MSRP: Now: $57.30 Add to Cart Compare sku: VS3 Van Norman Counter Bore Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare Allen Head Screw Fits most Tool Holder with BE-1119 cutter tips MSRP: Now: $1.07 Add to Cart Compare BE-1119 - Indexable Boring Bar Bit BE-1119Positive Rake bit for use with Counter Bore / Sleeve Trimming and Cylinder Chamfering Tool Holders MSRP: Now: $7.25 Add to Cart Compare BE-1120 - Indexable Boring Bar Bit Negative Rake BE-1120Premium Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $7.72 Add to Cart Compare BE-1120HD - Indexable Boring Bar Bit BE-1120HD Multi-Coated Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $8.94 Add to Cart Compare BE-2119 - Indexable Boring Bar Bit BE-2119Positive Rake bit with 3 cutting tips for use with VN-999 Tool Holders MSRP: Now: $9.30 Add to Cart Compare BE-8101 - Indexable Boring Bar Bit BE-8101Premium Carbide Positive Rake Bit for tooling that uses a positive rake cutter tip.Used on Blind Hole and some Cylinder Boring Tool Holders. MSRP: Now: $9.18 Add to Cart Compare BE-8101CBN - Indexable Boring Bar Bit CBN Tipped Positive Rake Bit for tooling that uses a positive rake cutter tip. CBN is second in hardness to diamond and can withstand extremely high temperatures making it long lasting verses carbide. The BE-8101 insert is used on Blind Hole Tool Holders... MSRP: Now: $49.84 Compare Flat Head Screw 4-40 Flat Head Screw for KW-1474 Tool Holder MSRP: Now: $0.75 Add to Cart Compare Flat Head Screw 6-32 Flat Head Screw for Most tooling that uses the BE-1120 and most tooling that uses the BE-8101 Cutter Tips These will NOT work on tolling with .2 on the end of the part number. For example, Part Number VN-1135 takes this screw. Part number VN-1135.2 does... MSRP: Now: $0.89 Add to Cart Compare Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
sku: BE-8101 BE-8101 - Indexable Boring Bar Bit MSRP: Now: $9.18 Add to Cart Compare sku: BE-8101CBN BE-8101CBN - Indexable Boring Bar Bit MSRP: Now: $49.84 Compare sku: BE-440375 Flat Head Screw 4-40 MSRP: Now: $0.75 Add to Cart Compare sku: BE-632375 Flat Head Screw 6-32 MSRP: Now: $0.89 Add to Cart Compare sku: KWC Kwik Way Counter Bore Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: KWF Kwik Way Finishing Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: KWR Kwik Way Roughing Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: RO1C Rottler Boring Bar - Counter Boring / Sleeve Trimming MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-1/4 Rottler Boring Bar Bit 1-1/4"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-3/4 Rottler Boring Bar Bit 1-3/4"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-7/16 Rottler Boring Bar Bit 1-7/16"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: BE-M3X10 Torx Head Screw M3 X 10 MSRP: Now: $0.89 Add to Cart Compare sku: VS2 Van Norman Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare sku: VS100 Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars MSRP: Now: $34.32 Add to Cart Compare sku: VS360 Van Norman Boring Bar Bit for the 888 & 999 Boring Bar MSRP: Now: $57.30 Add to Cart Compare sku: VS3 Van Norman Counter Bore Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare Allen Head Screw Fits most Tool Holder with BE-1119 cutter tips MSRP: Now: $1.07 Add to Cart Compare BE-1119 - Indexable Boring Bar Bit BE-1119Positive Rake bit for use with Counter Bore / Sleeve Trimming and Cylinder Chamfering Tool Holders MSRP: Now: $7.25 Add to Cart Compare BE-1120 - Indexable Boring Bar Bit Negative Rake BE-1120Premium Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $7.72 Add to Cart Compare BE-1120HD - Indexable Boring Bar Bit BE-1120HD Multi-Coated Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $8.94 Add to Cart Compare BE-2119 - Indexable Boring Bar Bit BE-2119Positive Rake bit with 3 cutting tips for use with VN-999 Tool Holders MSRP: Now: $9.30 Add to Cart Compare BE-8101 - Indexable Boring Bar Bit BE-8101Premium Carbide Positive Rake Bit for tooling that uses a positive rake cutter tip.Used on Blind Hole and some Cylinder Boring Tool Holders. MSRP: Now: $9.18 Add to Cart Compare BE-8101CBN - Indexable Boring Bar Bit CBN Tipped Positive Rake Bit for tooling that uses a positive rake cutter tip. CBN is second in hardness to diamond and can withstand extremely high temperatures making it long lasting verses carbide. The BE-8101 insert is used on Blind Hole Tool Holders... MSRP: Now: $49.84 Compare Flat Head Screw 4-40 Flat Head Screw for KW-1474 Tool Holder MSRP: Now: $0.75 Add to Cart Compare Flat Head Screw 6-32 Flat Head Screw for Most tooling that uses the BE-1120 and most tooling that uses the BE-8101 Cutter Tips These will NOT work on tolling with .2 on the end of the part number. For example, Part Number VN-1135 takes this screw. Part number VN-1135.2 does... MSRP: Now: $0.89 Add to Cart Compare Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
sku: BE-8101CBN BE-8101CBN - Indexable Boring Bar Bit MSRP: Now: $49.84 Compare sku: BE-440375 Flat Head Screw 4-40 MSRP: Now: $0.75 Add to Cart Compare sku: BE-632375 Flat Head Screw 6-32 MSRP: Now: $0.89 Add to Cart Compare sku: KWC Kwik Way Counter Bore Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: KWF Kwik Way Finishing Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: KWR Kwik Way Roughing Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: RO1C Rottler Boring Bar - Counter Boring / Sleeve Trimming MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-1/4 Rottler Boring Bar Bit 1-1/4"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-3/4 Rottler Boring Bar Bit 1-3/4"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-7/16 Rottler Boring Bar Bit 1-7/16"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: BE-M3X10 Torx Head Screw M3 X 10 MSRP: Now: $0.89 Add to Cart Compare sku: VS2 Van Norman Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare sku: VS100 Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars MSRP: Now: $34.32 Add to Cart Compare sku: VS360 Van Norman Boring Bar Bit for the 888 & 999 Boring Bar MSRP: Now: $57.30 Add to Cart Compare sku: VS3 Van Norman Counter Bore Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare Allen Head Screw Fits most Tool Holder with BE-1119 cutter tips MSRP: Now: $1.07 Add to Cart Compare BE-1119 - Indexable Boring Bar Bit BE-1119Positive Rake bit for use with Counter Bore / Sleeve Trimming and Cylinder Chamfering Tool Holders MSRP: Now: $7.25 Add to Cart Compare BE-1120 - Indexable Boring Bar Bit Negative Rake BE-1120Premium Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $7.72 Add to Cart Compare BE-1120HD - Indexable Boring Bar Bit BE-1120HD Multi-Coated Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $8.94 Add to Cart Compare BE-2119 - Indexable Boring Bar Bit BE-2119Positive Rake bit with 3 cutting tips for use with VN-999 Tool Holders MSRP: Now: $9.30 Add to Cart Compare BE-8101 - Indexable Boring Bar Bit BE-8101Premium Carbide Positive Rake Bit for tooling that uses a positive rake cutter tip.Used on Blind Hole and some Cylinder Boring Tool Holders. MSRP: Now: $9.18 Add to Cart Compare BE-8101CBN - Indexable Boring Bar Bit CBN Tipped Positive Rake Bit for tooling that uses a positive rake cutter tip. CBN is second in hardness to diamond and can withstand extremely high temperatures making it long lasting verses carbide. The BE-8101 insert is used on Blind Hole Tool Holders... MSRP: Now: $49.84 Compare Flat Head Screw 4-40 Flat Head Screw for KW-1474 Tool Holder MSRP: Now: $0.75 Add to Cart Compare Flat Head Screw 6-32 Flat Head Screw for Most tooling that uses the BE-1120 and most tooling that uses the BE-8101 Cutter Tips These will NOT work on tolling with .2 on the end of the part number. For example, Part Number VN-1135 takes this screw. Part number VN-1135.2 does... MSRP: Now: $0.89 Add to Cart Compare Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
sku: BE-440375 Flat Head Screw 4-40 MSRP: Now: $0.75 Add to Cart Compare sku: BE-632375 Flat Head Screw 6-32 MSRP: Now: $0.89 Add to Cart Compare sku: KWC Kwik Way Counter Bore Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: KWF Kwik Way Finishing Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: KWR Kwik Way Roughing Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: RO1C Rottler Boring Bar - Counter Boring / Sleeve Trimming MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-1/4 Rottler Boring Bar Bit 1-1/4"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-3/4 Rottler Boring Bar Bit 1-3/4"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-7/16 Rottler Boring Bar Bit 1-7/16"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: BE-M3X10 Torx Head Screw M3 X 10 MSRP: Now: $0.89 Add to Cart Compare sku: VS2 Van Norman Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare sku: VS100 Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars MSRP: Now: $34.32 Add to Cart Compare sku: VS360 Van Norman Boring Bar Bit for the 888 & 999 Boring Bar MSRP: Now: $57.30 Add to Cart Compare sku: VS3 Van Norman Counter Bore Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare Allen Head Screw Fits most Tool Holder with BE-1119 cutter tips MSRP: Now: $1.07 Add to Cart Compare BE-1119 - Indexable Boring Bar Bit BE-1119Positive Rake bit for use with Counter Bore / Sleeve Trimming and Cylinder Chamfering Tool Holders MSRP: Now: $7.25 Add to Cart Compare BE-1120 - Indexable Boring Bar Bit Negative Rake BE-1120Premium Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $7.72 Add to Cart Compare BE-1120HD - Indexable Boring Bar Bit BE-1120HD Multi-Coated Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $8.94 Add to Cart Compare BE-2119 - Indexable Boring Bar Bit BE-2119Positive Rake bit with 3 cutting tips for use with VN-999 Tool Holders MSRP: Now: $9.30 Add to Cart Compare BE-8101 - Indexable Boring Bar Bit BE-8101Premium Carbide Positive Rake Bit for tooling that uses a positive rake cutter tip.Used on Blind Hole and some Cylinder Boring Tool Holders. MSRP: Now: $9.18 Add to Cart Compare BE-8101CBN - Indexable Boring Bar Bit CBN Tipped Positive Rake Bit for tooling that uses a positive rake cutter tip. CBN is second in hardness to diamond and can withstand extremely high temperatures making it long lasting verses carbide. The BE-8101 insert is used on Blind Hole Tool Holders... MSRP: Now: $49.84 Compare Flat Head Screw 4-40 Flat Head Screw for KW-1474 Tool Holder MSRP: Now: $0.75 Add to Cart Compare Flat Head Screw 6-32 Flat Head Screw for Most tooling that uses the BE-1120 and most tooling that uses the BE-8101 Cutter Tips These will NOT work on tolling with .2 on the end of the part number. For example, Part Number VN-1135 takes this screw. Part number VN-1135.2 does... MSRP: Now: $0.89 Add to Cart Compare Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
sku: BE-632375 Flat Head Screw 6-32 MSRP: Now: $0.89 Add to Cart Compare sku: KWC Kwik Way Counter Bore Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: KWF Kwik Way Finishing Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: KWR Kwik Way Roughing Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: RO1C Rottler Boring Bar - Counter Boring / Sleeve Trimming MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-1/4 Rottler Boring Bar Bit 1-1/4"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-3/4 Rottler Boring Bar Bit 1-3/4"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-7/16 Rottler Boring Bar Bit 1-7/16"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: BE-M3X10 Torx Head Screw M3 X 10 MSRP: Now: $0.89 Add to Cart Compare sku: VS2 Van Norman Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare sku: VS100 Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars MSRP: Now: $34.32 Add to Cart Compare sku: VS360 Van Norman Boring Bar Bit for the 888 & 999 Boring Bar MSRP: Now: $57.30 Add to Cart Compare sku: VS3 Van Norman Counter Bore Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare Allen Head Screw Fits most Tool Holder with BE-1119 cutter tips MSRP: Now: $1.07 Add to Cart Compare BE-1119 - Indexable Boring Bar Bit BE-1119Positive Rake bit for use with Counter Bore / Sleeve Trimming and Cylinder Chamfering Tool Holders MSRP: Now: $7.25 Add to Cart Compare BE-1120 - Indexable Boring Bar Bit Negative Rake BE-1120Premium Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $7.72 Add to Cart Compare BE-1120HD - Indexable Boring Bar Bit BE-1120HD Multi-Coated Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $8.94 Add to Cart Compare BE-2119 - Indexable Boring Bar Bit BE-2119Positive Rake bit with 3 cutting tips for use with VN-999 Tool Holders MSRP: Now: $9.30 Add to Cart Compare BE-8101 - Indexable Boring Bar Bit BE-8101Premium Carbide Positive Rake Bit for tooling that uses a positive rake cutter tip.Used on Blind Hole and some Cylinder Boring Tool Holders. MSRP: Now: $9.18 Add to Cart Compare BE-8101CBN - Indexable Boring Bar Bit CBN Tipped Positive Rake Bit for tooling that uses a positive rake cutter tip. CBN is second in hardness to diamond and can withstand extremely high temperatures making it long lasting verses carbide. The BE-8101 insert is used on Blind Hole Tool Holders... MSRP: Now: $49.84 Compare Flat Head Screw 4-40 Flat Head Screw for KW-1474 Tool Holder MSRP: Now: $0.75 Add to Cart Compare Flat Head Screw 6-32 Flat Head Screw for Most tooling that uses the BE-1120 and most tooling that uses the BE-8101 Cutter Tips These will NOT work on tolling with .2 on the end of the part number. For example, Part Number VN-1135 takes this screw. Part number VN-1135.2 does... MSRP: Now: $0.89 Add to Cart Compare Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
sku: KWC Kwik Way Counter Bore Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: KWF Kwik Way Finishing Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: KWR Kwik Way Roughing Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: RO1C Rottler Boring Bar - Counter Boring / Sleeve Trimming MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-1/4 Rottler Boring Bar Bit 1-1/4"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-3/4 Rottler Boring Bar Bit 1-3/4"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-7/16 Rottler Boring Bar Bit 1-7/16"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: BE-M3X10 Torx Head Screw M3 X 10 MSRP: Now: $0.89 Add to Cart Compare sku: VS2 Van Norman Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare sku: VS100 Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars MSRP: Now: $34.32 Add to Cart Compare sku: VS360 Van Norman Boring Bar Bit for the 888 & 999 Boring Bar MSRP: Now: $57.30 Add to Cart Compare sku: VS3 Van Norman Counter Bore Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare Allen Head Screw Fits most Tool Holder with BE-1119 cutter tips MSRP: Now: $1.07 Add to Cart Compare BE-1119 - Indexable Boring Bar Bit BE-1119Positive Rake bit for use with Counter Bore / Sleeve Trimming and Cylinder Chamfering Tool Holders MSRP: Now: $7.25 Add to Cart Compare BE-1120 - Indexable Boring Bar Bit Negative Rake BE-1120Premium Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $7.72 Add to Cart Compare BE-1120HD - Indexable Boring Bar Bit BE-1120HD Multi-Coated Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $8.94 Add to Cart Compare BE-2119 - Indexable Boring Bar Bit BE-2119Positive Rake bit with 3 cutting tips for use with VN-999 Tool Holders MSRP: Now: $9.30 Add to Cart Compare BE-8101 - Indexable Boring Bar Bit BE-8101Premium Carbide Positive Rake Bit for tooling that uses a positive rake cutter tip.Used on Blind Hole and some Cylinder Boring Tool Holders. MSRP: Now: $9.18 Add to Cart Compare BE-8101CBN - Indexable Boring Bar Bit CBN Tipped Positive Rake Bit for tooling that uses a positive rake cutter tip. CBN is second in hardness to diamond and can withstand extremely high temperatures making it long lasting verses carbide. The BE-8101 insert is used on Blind Hole Tool Holders... MSRP: Now: $49.84 Compare Flat Head Screw 4-40 Flat Head Screw for KW-1474 Tool Holder MSRP: Now: $0.75 Add to Cart Compare Flat Head Screw 6-32 Flat Head Screw for Most tooling that uses the BE-1120 and most tooling that uses the BE-8101 Cutter Tips These will NOT work on tolling with .2 on the end of the part number. For example, Part Number VN-1135 takes this screw. Part number VN-1135.2 does... MSRP: Now: $0.89 Add to Cart Compare Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
sku: KWF Kwik Way Finishing Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: KWR Kwik Way Roughing Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: RO1C Rottler Boring Bar - Counter Boring / Sleeve Trimming MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-1/4 Rottler Boring Bar Bit 1-1/4"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-3/4 Rottler Boring Bar Bit 1-3/4"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-7/16 Rottler Boring Bar Bit 1-7/16"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: BE-M3X10 Torx Head Screw M3 X 10 MSRP: Now: $0.89 Add to Cart Compare sku: VS2 Van Norman Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare sku: VS100 Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars MSRP: Now: $34.32 Add to Cart Compare sku: VS360 Van Norman Boring Bar Bit for the 888 & 999 Boring Bar MSRP: Now: $57.30 Add to Cart Compare sku: VS3 Van Norman Counter Bore Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare Allen Head Screw Fits most Tool Holder with BE-1119 cutter tips MSRP: Now: $1.07 Add to Cart Compare BE-1119 - Indexable Boring Bar Bit BE-1119Positive Rake bit for use with Counter Bore / Sleeve Trimming and Cylinder Chamfering Tool Holders MSRP: Now: $7.25 Add to Cart Compare BE-1120 - Indexable Boring Bar Bit Negative Rake BE-1120Premium Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $7.72 Add to Cart Compare BE-1120HD - Indexable Boring Bar Bit BE-1120HD Multi-Coated Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $8.94 Add to Cart Compare BE-2119 - Indexable Boring Bar Bit BE-2119Positive Rake bit with 3 cutting tips for use with VN-999 Tool Holders MSRP: Now: $9.30 Add to Cart Compare BE-8101 - Indexable Boring Bar Bit BE-8101Premium Carbide Positive Rake Bit for tooling that uses a positive rake cutter tip.Used on Blind Hole and some Cylinder Boring Tool Holders. MSRP: Now: $9.18 Add to Cart Compare BE-8101CBN - Indexable Boring Bar Bit CBN Tipped Positive Rake Bit for tooling that uses a positive rake cutter tip. CBN is second in hardness to diamond and can withstand extremely high temperatures making it long lasting verses carbide. The BE-8101 insert is used on Blind Hole Tool Holders... MSRP: Now: $49.84 Compare Flat Head Screw 4-40 Flat Head Screw for KW-1474 Tool Holder MSRP: Now: $0.75 Add to Cart Compare Flat Head Screw 6-32 Flat Head Screw for Most tooling that uses the BE-1120 and most tooling that uses the BE-8101 Cutter Tips These will NOT work on tolling with .2 on the end of the part number. For example, Part Number VN-1135 takes this screw. Part number VN-1135.2 does... MSRP: Now: $0.89 Add to Cart Compare Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
sku: KWR Kwik Way Roughing Boring Bar Bit MSRP: Now: $29.97 Add to Cart Compare sku: RO1C Rottler Boring Bar - Counter Boring / Sleeve Trimming MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-1/4 Rottler Boring Bar Bit 1-1/4"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-3/4 Rottler Boring Bar Bit 1-3/4"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-7/16 Rottler Boring Bar Bit 1-7/16"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: BE-M3X10 Torx Head Screw M3 X 10 MSRP: Now: $0.89 Add to Cart Compare sku: VS2 Van Norman Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare sku: VS100 Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars MSRP: Now: $34.32 Add to Cart Compare sku: VS360 Van Norman Boring Bar Bit for the 888 & 999 Boring Bar MSRP: Now: $57.30 Add to Cart Compare sku: VS3 Van Norman Counter Bore Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare Allen Head Screw Fits most Tool Holder with BE-1119 cutter tips MSRP: Now: $1.07 Add to Cart Compare BE-1119 - Indexable Boring Bar Bit BE-1119Positive Rake bit for use with Counter Bore / Sleeve Trimming and Cylinder Chamfering Tool Holders MSRP: Now: $7.25 Add to Cart Compare BE-1120 - Indexable Boring Bar Bit Negative Rake BE-1120Premium Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $7.72 Add to Cart Compare BE-1120HD - Indexable Boring Bar Bit BE-1120HD Multi-Coated Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $8.94 Add to Cart Compare BE-2119 - Indexable Boring Bar Bit BE-2119Positive Rake bit with 3 cutting tips for use with VN-999 Tool Holders MSRP: Now: $9.30 Add to Cart Compare BE-8101 - Indexable Boring Bar Bit BE-8101Premium Carbide Positive Rake Bit for tooling that uses a positive rake cutter tip.Used on Blind Hole and some Cylinder Boring Tool Holders. MSRP: Now: $9.18 Add to Cart Compare BE-8101CBN - Indexable Boring Bar Bit CBN Tipped Positive Rake Bit for tooling that uses a positive rake cutter tip. CBN is second in hardness to diamond and can withstand extremely high temperatures making it long lasting verses carbide. The BE-8101 insert is used on Blind Hole Tool Holders... MSRP: Now: $49.84 Compare Flat Head Screw 4-40 Flat Head Screw for KW-1474 Tool Holder MSRP: Now: $0.75 Add to Cart Compare Flat Head Screw 6-32 Flat Head Screw for Most tooling that uses the BE-1120 and most tooling that uses the BE-8101 Cutter Tips These will NOT work on tolling with .2 on the end of the part number. For example, Part Number VN-1135 takes this screw. Part number VN-1135.2 does... MSRP: Now: $0.89 Add to Cart Compare Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
sku: RO1C Rottler Boring Bar - Counter Boring / Sleeve Trimming MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-1/4 Rottler Boring Bar Bit 1-1/4"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-3/4 Rottler Boring Bar Bit 1-3/4"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-7/16 Rottler Boring Bar Bit 1-7/16"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: BE-M3X10 Torx Head Screw M3 X 10 MSRP: Now: $0.89 Add to Cart Compare sku: VS2 Van Norman Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare sku: VS100 Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars MSRP: Now: $34.32 Add to Cart Compare sku: VS360 Van Norman Boring Bar Bit for the 888 & 999 Boring Bar MSRP: Now: $57.30 Add to Cart Compare sku: VS3 Van Norman Counter Bore Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare Allen Head Screw Fits most Tool Holder with BE-1119 cutter tips MSRP: Now: $1.07 Add to Cart Compare BE-1119 - Indexable Boring Bar Bit BE-1119Positive Rake bit for use with Counter Bore / Sleeve Trimming and Cylinder Chamfering Tool Holders MSRP: Now: $7.25 Add to Cart Compare BE-1120 - Indexable Boring Bar Bit Negative Rake BE-1120Premium Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $7.72 Add to Cart Compare BE-1120HD - Indexable Boring Bar Bit BE-1120HD Multi-Coated Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $8.94 Add to Cart Compare BE-2119 - Indexable Boring Bar Bit BE-2119Positive Rake bit with 3 cutting tips for use with VN-999 Tool Holders MSRP: Now: $9.30 Add to Cart Compare BE-8101 - Indexable Boring Bar Bit BE-8101Premium Carbide Positive Rake Bit for tooling that uses a positive rake cutter tip.Used on Blind Hole and some Cylinder Boring Tool Holders. MSRP: Now: $9.18 Add to Cart Compare BE-8101CBN - Indexable Boring Bar Bit CBN Tipped Positive Rake Bit for tooling that uses a positive rake cutter tip. CBN is second in hardness to diamond and can withstand extremely high temperatures making it long lasting verses carbide. The BE-8101 insert is used on Blind Hole Tool Holders... MSRP: Now: $49.84 Compare Flat Head Screw 4-40 Flat Head Screw for KW-1474 Tool Holder MSRP: Now: $0.75 Add to Cart Compare Flat Head Screw 6-32 Flat Head Screw for Most tooling that uses the BE-1120 and most tooling that uses the BE-8101 Cutter Tips These will NOT work on tolling with .2 on the end of the part number. For example, Part Number VN-1135 takes this screw. Part number VN-1135.2 does... MSRP: Now: $0.89 Add to Cart Compare Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
sku: RO1-1-1/4 Rottler Boring Bar Bit 1-1/4"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-3/4 Rottler Boring Bar Bit 1-3/4"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-7/16 Rottler Boring Bar Bit 1-7/16"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: BE-M3X10 Torx Head Screw M3 X 10 MSRP: Now: $0.89 Add to Cart Compare sku: VS2 Van Norman Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare sku: VS100 Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars MSRP: Now: $34.32 Add to Cart Compare sku: VS360 Van Norman Boring Bar Bit for the 888 & 999 Boring Bar MSRP: Now: $57.30 Add to Cart Compare sku: VS3 Van Norman Counter Bore Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare Allen Head Screw Fits most Tool Holder with BE-1119 cutter tips MSRP: Now: $1.07 Add to Cart Compare BE-1119 - Indexable Boring Bar Bit BE-1119Positive Rake bit for use with Counter Bore / Sleeve Trimming and Cylinder Chamfering Tool Holders MSRP: Now: $7.25 Add to Cart Compare BE-1120 - Indexable Boring Bar Bit Negative Rake BE-1120Premium Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $7.72 Add to Cart Compare BE-1120HD - Indexable Boring Bar Bit BE-1120HD Multi-Coated Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $8.94 Add to Cart Compare BE-2119 - Indexable Boring Bar Bit BE-2119Positive Rake bit with 3 cutting tips for use with VN-999 Tool Holders MSRP: Now: $9.30 Add to Cart Compare BE-8101 - Indexable Boring Bar Bit BE-8101Premium Carbide Positive Rake Bit for tooling that uses a positive rake cutter tip.Used on Blind Hole and some Cylinder Boring Tool Holders. MSRP: Now: $9.18 Add to Cart Compare BE-8101CBN - Indexable Boring Bar Bit CBN Tipped Positive Rake Bit for tooling that uses a positive rake cutter tip. CBN is second in hardness to diamond and can withstand extremely high temperatures making it long lasting verses carbide. The BE-8101 insert is used on Blind Hole Tool Holders... MSRP: Now: $49.84 Compare Flat Head Screw 4-40 Flat Head Screw for KW-1474 Tool Holder MSRP: Now: $0.75 Add to Cart Compare Flat Head Screw 6-32 Flat Head Screw for Most tooling that uses the BE-1120 and most tooling that uses the BE-8101 Cutter Tips These will NOT work on tolling with .2 on the end of the part number. For example, Part Number VN-1135 takes this screw. Part number VN-1135.2 does... MSRP: Now: $0.89 Add to Cart Compare Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
sku: RO1-1-3/4 Rottler Boring Bar Bit 1-3/4"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: RO1-1-7/16 Rottler Boring Bar Bit 1-7/16"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: BE-M3X10 Torx Head Screw M3 X 10 MSRP: Now: $0.89 Add to Cart Compare sku: VS2 Van Norman Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare sku: VS100 Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars MSRP: Now: $34.32 Add to Cart Compare sku: VS360 Van Norman Boring Bar Bit for the 888 & 999 Boring Bar MSRP: Now: $57.30 Add to Cart Compare sku: VS3 Van Norman Counter Bore Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare Allen Head Screw Fits most Tool Holder with BE-1119 cutter tips MSRP: Now: $1.07 Add to Cart Compare BE-1119 - Indexable Boring Bar Bit BE-1119Positive Rake bit for use with Counter Bore / Sleeve Trimming and Cylinder Chamfering Tool Holders MSRP: Now: $7.25 Add to Cart Compare BE-1120 - Indexable Boring Bar Bit Negative Rake BE-1120Premium Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $7.72 Add to Cart Compare BE-1120HD - Indexable Boring Bar Bit BE-1120HD Multi-Coated Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $8.94 Add to Cart Compare BE-2119 - Indexable Boring Bar Bit BE-2119Positive Rake bit with 3 cutting tips for use with VN-999 Tool Holders MSRP: Now: $9.30 Add to Cart Compare BE-8101 - Indexable Boring Bar Bit BE-8101Premium Carbide Positive Rake Bit for tooling that uses a positive rake cutter tip.Used on Blind Hole and some Cylinder Boring Tool Holders. MSRP: Now: $9.18 Add to Cart Compare BE-8101CBN - Indexable Boring Bar Bit CBN Tipped Positive Rake Bit for tooling that uses a positive rake cutter tip. CBN is second in hardness to diamond and can withstand extremely high temperatures making it long lasting verses carbide. The BE-8101 insert is used on Blind Hole Tool Holders... MSRP: Now: $49.84 Compare Flat Head Screw 4-40 Flat Head Screw for KW-1474 Tool Holder MSRP: Now: $0.75 Add to Cart Compare Flat Head Screw 6-32 Flat Head Screw for Most tooling that uses the BE-1120 and most tooling that uses the BE-8101 Cutter Tips These will NOT work on tolling with .2 on the end of the part number. For example, Part Number VN-1135 takes this screw. Part number VN-1135.2 does... MSRP: Now: $0.89 Add to Cart Compare Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
sku: RO1-1-7/16 Rottler Boring Bar Bit 1-7/16"- Cylinder Boring MSRP: Now: $24.75 Add to Cart Compare sku: BE-M3X10 Torx Head Screw M3 X 10 MSRP: Now: $0.89 Add to Cart Compare sku: VS2 Van Norman Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare sku: VS100 Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars MSRP: Now: $34.32 Add to Cart Compare sku: VS360 Van Norman Boring Bar Bit for the 888 & 999 Boring Bar MSRP: Now: $57.30 Add to Cart Compare sku: VS3 Van Norman Counter Bore Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare Allen Head Screw Fits most Tool Holder with BE-1119 cutter tips MSRP: Now: $1.07 Add to Cart Compare BE-1119 - Indexable Boring Bar Bit BE-1119Positive Rake bit for use with Counter Bore / Sleeve Trimming and Cylinder Chamfering Tool Holders MSRP: Now: $7.25 Add to Cart Compare BE-1120 - Indexable Boring Bar Bit Negative Rake BE-1120Premium Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $7.72 Add to Cart Compare BE-1120HD - Indexable Boring Bar Bit BE-1120HD Multi-Coated Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $8.94 Add to Cart Compare BE-2119 - Indexable Boring Bar Bit BE-2119Positive Rake bit with 3 cutting tips for use with VN-999 Tool Holders MSRP: Now: $9.30 Add to Cart Compare BE-8101 - Indexable Boring Bar Bit BE-8101Premium Carbide Positive Rake Bit for tooling that uses a positive rake cutter tip.Used on Blind Hole and some Cylinder Boring Tool Holders. MSRP: Now: $9.18 Add to Cart Compare BE-8101CBN - Indexable Boring Bar Bit CBN Tipped Positive Rake Bit for tooling that uses a positive rake cutter tip. CBN is second in hardness to diamond and can withstand extremely high temperatures making it long lasting verses carbide. The BE-8101 insert is used on Blind Hole Tool Holders... MSRP: Now: $49.84 Compare Flat Head Screw 4-40 Flat Head Screw for KW-1474 Tool Holder MSRP: Now: $0.75 Add to Cart Compare Flat Head Screw 6-32 Flat Head Screw for Most tooling that uses the BE-1120 and most tooling that uses the BE-8101 Cutter Tips These will NOT work on tolling with .2 on the end of the part number. For example, Part Number VN-1135 takes this screw. Part number VN-1135.2 does... MSRP: Now: $0.89 Add to Cart Compare Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
sku: BE-M3X10 Torx Head Screw M3 X 10 MSRP: Now: $0.89 Add to Cart Compare sku: VS2 Van Norman Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare sku: VS100 Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars MSRP: Now: $34.32 Add to Cart Compare sku: VS360 Van Norman Boring Bar Bit for the 888 & 999 Boring Bar MSRP: Now: $57.30 Add to Cart Compare sku: VS3 Van Norman Counter Bore Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare Allen Head Screw Fits most Tool Holder with BE-1119 cutter tips MSRP: Now: $1.07 Add to Cart Compare BE-1119 - Indexable Boring Bar Bit BE-1119Positive Rake bit for use with Counter Bore / Sleeve Trimming and Cylinder Chamfering Tool Holders MSRP: Now: $7.25 Add to Cart Compare BE-1120 - Indexable Boring Bar Bit Negative Rake BE-1120Premium Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $7.72 Add to Cart Compare BE-1120HD - Indexable Boring Bar Bit BE-1120HD Multi-Coated Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $8.94 Add to Cart Compare BE-2119 - Indexable Boring Bar Bit BE-2119Positive Rake bit with 3 cutting tips for use with VN-999 Tool Holders MSRP: Now: $9.30 Add to Cart Compare BE-8101 - Indexable Boring Bar Bit BE-8101Premium Carbide Positive Rake Bit for tooling that uses a positive rake cutter tip.Used on Blind Hole and some Cylinder Boring Tool Holders. MSRP: Now: $9.18 Add to Cart Compare BE-8101CBN - Indexable Boring Bar Bit CBN Tipped Positive Rake Bit for tooling that uses a positive rake cutter tip. CBN is second in hardness to diamond and can withstand extremely high temperatures making it long lasting verses carbide. The BE-8101 insert is used on Blind Hole Tool Holders... MSRP: Now: $49.84 Compare Flat Head Screw 4-40 Flat Head Screw for KW-1474 Tool Holder MSRP: Now: $0.75 Add to Cart Compare Flat Head Screw 6-32 Flat Head Screw for Most tooling that uses the BE-1120 and most tooling that uses the BE-8101 Cutter Tips These will NOT work on tolling with .2 on the end of the part number. For example, Part Number VN-1135 takes this screw. Part number VN-1135.2 does... MSRP: Now: $0.89 Add to Cart Compare Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
sku: VS2 Van Norman Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare sku: VS100 Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars MSRP: Now: $34.32 Add to Cart Compare sku: VS360 Van Norman Boring Bar Bit for the 888 & 999 Boring Bar MSRP: Now: $57.30 Add to Cart Compare sku: VS3 Van Norman Counter Bore Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare Allen Head Screw Fits most Tool Holder with BE-1119 cutter tips MSRP: Now: $1.07 Add to Cart Compare BE-1119 - Indexable Boring Bar Bit BE-1119Positive Rake bit for use with Counter Bore / Sleeve Trimming and Cylinder Chamfering Tool Holders MSRP: Now: $7.25 Add to Cart Compare BE-1120 - Indexable Boring Bar Bit Negative Rake BE-1120Premium Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $7.72 Add to Cart Compare BE-1120HD - Indexable Boring Bar Bit BE-1120HD Multi-Coated Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $8.94 Add to Cart Compare BE-2119 - Indexable Boring Bar Bit BE-2119Positive Rake bit with 3 cutting tips for use with VN-999 Tool Holders MSRP: Now: $9.30 Add to Cart Compare BE-8101 - Indexable Boring Bar Bit BE-8101Premium Carbide Positive Rake Bit for tooling that uses a positive rake cutter tip.Used on Blind Hole and some Cylinder Boring Tool Holders. MSRP: Now: $9.18 Add to Cart Compare BE-8101CBN - Indexable Boring Bar Bit CBN Tipped Positive Rake Bit for tooling that uses a positive rake cutter tip. CBN is second in hardness to diamond and can withstand extremely high temperatures making it long lasting verses carbide. The BE-8101 insert is used on Blind Hole Tool Holders... MSRP: Now: $49.84 Compare Flat Head Screw 4-40 Flat Head Screw for KW-1474 Tool Holder MSRP: Now: $0.75 Add to Cart Compare Flat Head Screw 6-32 Flat Head Screw for Most tooling that uses the BE-1120 and most tooling that uses the BE-8101 Cutter Tips These will NOT work on tolling with .2 on the end of the part number. For example, Part Number VN-1135 takes this screw. Part number VN-1135.2 does... MSRP: Now: $0.89 Add to Cart Compare Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
sku: VS100 Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars MSRP: Now: $34.32 Add to Cart Compare sku: VS360 Van Norman Boring Bar Bit for the 888 & 999 Boring Bar MSRP: Now: $57.30 Add to Cart Compare sku: VS3 Van Norman Counter Bore Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare Allen Head Screw Fits most Tool Holder with BE-1119 cutter tips MSRP: Now: $1.07 Add to Cart Compare BE-1119 - Indexable Boring Bar Bit BE-1119Positive Rake bit for use with Counter Bore / Sleeve Trimming and Cylinder Chamfering Tool Holders MSRP: Now: $7.25 Add to Cart Compare BE-1120 - Indexable Boring Bar Bit Negative Rake BE-1120Premium Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $7.72 Add to Cart Compare BE-1120HD - Indexable Boring Bar Bit BE-1120HD Multi-Coated Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $8.94 Add to Cart Compare BE-2119 - Indexable Boring Bar Bit BE-2119Positive Rake bit with 3 cutting tips for use with VN-999 Tool Holders MSRP: Now: $9.30 Add to Cart Compare BE-8101 - Indexable Boring Bar Bit BE-8101Premium Carbide Positive Rake Bit for tooling that uses a positive rake cutter tip.Used on Blind Hole and some Cylinder Boring Tool Holders. MSRP: Now: $9.18 Add to Cart Compare BE-8101CBN - Indexable Boring Bar Bit CBN Tipped Positive Rake Bit for tooling that uses a positive rake cutter tip. CBN is second in hardness to diamond and can withstand extremely high temperatures making it long lasting verses carbide. The BE-8101 insert is used on Blind Hole Tool Holders... MSRP: Now: $49.84 Compare Flat Head Screw 4-40 Flat Head Screw for KW-1474 Tool Holder MSRP: Now: $0.75 Add to Cart Compare Flat Head Screw 6-32 Flat Head Screw for Most tooling that uses the BE-1120 and most tooling that uses the BE-8101 Cutter Tips These will NOT work on tolling with .2 on the end of the part number. For example, Part Number VN-1135 takes this screw. Part number VN-1135.2 does... MSRP: Now: $0.89 Add to Cart Compare Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
sku: VS360 Van Norman Boring Bar Bit for the 888 & 999 Boring Bar MSRP: Now: $57.30 Add to Cart Compare sku: VS3 Van Norman Counter Bore Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare Allen Head Screw Fits most Tool Holder with BE-1119 cutter tips MSRP: Now: $1.07 Add to Cart Compare BE-1119 - Indexable Boring Bar Bit BE-1119Positive Rake bit for use with Counter Bore / Sleeve Trimming and Cylinder Chamfering Tool Holders MSRP: Now: $7.25 Add to Cart Compare BE-1120 - Indexable Boring Bar Bit Negative Rake BE-1120Premium Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $7.72 Add to Cart Compare BE-1120HD - Indexable Boring Bar Bit BE-1120HD Multi-Coated Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $8.94 Add to Cart Compare BE-2119 - Indexable Boring Bar Bit BE-2119Positive Rake bit with 3 cutting tips for use with VN-999 Tool Holders MSRP: Now: $9.30 Add to Cart Compare BE-8101 - Indexable Boring Bar Bit BE-8101Premium Carbide Positive Rake Bit for tooling that uses a positive rake cutter tip.Used on Blind Hole and some Cylinder Boring Tool Holders. MSRP: Now: $9.18 Add to Cart Compare BE-8101CBN - Indexable Boring Bar Bit CBN Tipped Positive Rake Bit for tooling that uses a positive rake cutter tip. CBN is second in hardness to diamond and can withstand extremely high temperatures making it long lasting verses carbide. The BE-8101 insert is used on Blind Hole Tool Holders... MSRP: Now: $49.84 Compare Flat Head Screw 4-40 Flat Head Screw for KW-1474 Tool Holder MSRP: Now: $0.75 Add to Cart Compare Flat Head Screw 6-32 Flat Head Screw for Most tooling that uses the BE-1120 and most tooling that uses the BE-8101 Cutter Tips These will NOT work on tolling with .2 on the end of the part number. For example, Part Number VN-1135 takes this screw. Part number VN-1135.2 does... MSRP: Now: $0.89 Add to Cart Compare Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
sku: VS3 Van Norman Counter Bore Boring Bar Bit MSRP: Now: $34.32 Add to Cart Compare Allen Head Screw Fits most Tool Holder with BE-1119 cutter tips MSRP: Now: $1.07 Add to Cart Compare BE-1119 - Indexable Boring Bar Bit BE-1119Positive Rake bit for use with Counter Bore / Sleeve Trimming and Cylinder Chamfering Tool Holders MSRP: Now: $7.25 Add to Cart Compare BE-1120 - Indexable Boring Bar Bit Negative Rake BE-1120Premium Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $7.72 Add to Cart Compare BE-1120HD - Indexable Boring Bar Bit BE-1120HD Multi-Coated Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $8.94 Add to Cart Compare BE-2119 - Indexable Boring Bar Bit BE-2119Positive Rake bit with 3 cutting tips for use with VN-999 Tool Holders MSRP: Now: $9.30 Add to Cart Compare BE-8101 - Indexable Boring Bar Bit BE-8101Premium Carbide Positive Rake Bit for tooling that uses a positive rake cutter tip.Used on Blind Hole and some Cylinder Boring Tool Holders. MSRP: Now: $9.18 Add to Cart Compare BE-8101CBN - Indexable Boring Bar Bit CBN Tipped Positive Rake Bit for tooling that uses a positive rake cutter tip. CBN is second in hardness to diamond and can withstand extremely high temperatures making it long lasting verses carbide. The BE-8101 insert is used on Blind Hole Tool Holders... MSRP: Now: $49.84 Compare Flat Head Screw 4-40 Flat Head Screw for KW-1474 Tool Holder MSRP: Now: $0.75 Add to Cart Compare Flat Head Screw 6-32 Flat Head Screw for Most tooling that uses the BE-1120 and most tooling that uses the BE-8101 Cutter Tips These will NOT work on tolling with .2 on the end of the part number. For example, Part Number VN-1135 takes this screw. Part number VN-1135.2 does... MSRP: Now: $0.89 Add to Cart Compare Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
Allen Head Screw Fits most Tool Holder with BE-1119 cutter tips MSRP: Now: $1.07 Add to Cart Compare BE-1119 - Indexable Boring Bar Bit BE-1119Positive Rake bit for use with Counter Bore / Sleeve Trimming and Cylinder Chamfering Tool Holders MSRP: Now: $7.25 Add to Cart Compare BE-1120 - Indexable Boring Bar Bit Negative Rake BE-1120Premium Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $7.72 Add to Cart Compare BE-1120HD - Indexable Boring Bar Bit BE-1120HD Multi-Coated Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $8.94 Add to Cart Compare BE-2119 - Indexable Boring Bar Bit BE-2119Positive Rake bit with 3 cutting tips for use with VN-999 Tool Holders MSRP: Now: $9.30 Add to Cart Compare BE-8101 - Indexable Boring Bar Bit BE-8101Premium Carbide Positive Rake Bit for tooling that uses a positive rake cutter tip.Used on Blind Hole and some Cylinder Boring Tool Holders. MSRP: Now: $9.18 Add to Cart Compare BE-8101CBN - Indexable Boring Bar Bit CBN Tipped Positive Rake Bit for tooling that uses a positive rake cutter tip. CBN is second in hardness to diamond and can withstand extremely high temperatures making it long lasting verses carbide. The BE-8101 insert is used on Blind Hole Tool Holders... MSRP: Now: $49.84 Compare Flat Head Screw 4-40 Flat Head Screw for KW-1474 Tool Holder MSRP: Now: $0.75 Add to Cart Compare Flat Head Screw 6-32 Flat Head Screw for Most tooling that uses the BE-1120 and most tooling that uses the BE-8101 Cutter Tips These will NOT work on tolling with .2 on the end of the part number. For example, Part Number VN-1135 takes this screw. Part number VN-1135.2 does... MSRP: Now: $0.89 Add to Cart Compare Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
BE-1119 - Indexable Boring Bar Bit BE-1119Positive Rake bit for use with Counter Bore / Sleeve Trimming and Cylinder Chamfering Tool Holders MSRP: Now: $7.25 Add to Cart Compare BE-1120 - Indexable Boring Bar Bit Negative Rake BE-1120Premium Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $7.72 Add to Cart Compare BE-1120HD - Indexable Boring Bar Bit BE-1120HD Multi-Coated Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $8.94 Add to Cart Compare BE-2119 - Indexable Boring Bar Bit BE-2119Positive Rake bit with 3 cutting tips for use with VN-999 Tool Holders MSRP: Now: $9.30 Add to Cart Compare BE-8101 - Indexable Boring Bar Bit BE-8101Premium Carbide Positive Rake Bit for tooling that uses a positive rake cutter tip.Used on Blind Hole and some Cylinder Boring Tool Holders. MSRP: Now: $9.18 Add to Cart Compare BE-8101CBN - Indexable Boring Bar Bit CBN Tipped Positive Rake Bit for tooling that uses a positive rake cutter tip. CBN is second in hardness to diamond and can withstand extremely high temperatures making it long lasting verses carbide. The BE-8101 insert is used on Blind Hole Tool Holders... MSRP: Now: $49.84 Compare Flat Head Screw 4-40 Flat Head Screw for KW-1474 Tool Holder MSRP: Now: $0.75 Add to Cart Compare Flat Head Screw 6-32 Flat Head Screw for Most tooling that uses the BE-1120 and most tooling that uses the BE-8101 Cutter Tips These will NOT work on tolling with .2 on the end of the part number. For example, Part Number VN-1135 takes this screw. Part number VN-1135.2 does... MSRP: Now: $0.89 Add to Cart Compare Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
BE-1120 - Indexable Boring Bar Bit Negative Rake BE-1120Premium Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $7.72 Add to Cart Compare BE-1120HD - Indexable Boring Bar Bit BE-1120HD Multi-Coated Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $8.94 Add to Cart Compare BE-2119 - Indexable Boring Bar Bit BE-2119Positive Rake bit with 3 cutting tips for use with VN-999 Tool Holders MSRP: Now: $9.30 Add to Cart Compare BE-8101 - Indexable Boring Bar Bit BE-8101Premium Carbide Positive Rake Bit for tooling that uses a positive rake cutter tip.Used on Blind Hole and some Cylinder Boring Tool Holders. MSRP: Now: $9.18 Add to Cart Compare BE-8101CBN - Indexable Boring Bar Bit CBN Tipped Positive Rake Bit for tooling that uses a positive rake cutter tip. CBN is second in hardness to diamond and can withstand extremely high temperatures making it long lasting verses carbide. The BE-8101 insert is used on Blind Hole Tool Holders... MSRP: Now: $49.84 Compare Flat Head Screw 4-40 Flat Head Screw for KW-1474 Tool Holder MSRP: Now: $0.75 Add to Cart Compare Flat Head Screw 6-32 Flat Head Screw for Most tooling that uses the BE-1120 and most tooling that uses the BE-8101 Cutter Tips These will NOT work on tolling with .2 on the end of the part number. For example, Part Number VN-1135 takes this screw. Part number VN-1135.2 does... MSRP: Now: $0.89 Add to Cart Compare Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
BE-1120HD - Indexable Boring Bar Bit BE-1120HD Multi-Coated Negative Rake Carbide Boring Bar Bit.Used on the Cylinder Boring Tool Holders.3 useable edges on each side. MSRP: Now: $8.94 Add to Cart Compare BE-2119 - Indexable Boring Bar Bit BE-2119Positive Rake bit with 3 cutting tips for use with VN-999 Tool Holders MSRP: Now: $9.30 Add to Cart Compare BE-8101 - Indexable Boring Bar Bit BE-8101Premium Carbide Positive Rake Bit for tooling that uses a positive rake cutter tip.Used on Blind Hole and some Cylinder Boring Tool Holders. MSRP: Now: $9.18 Add to Cart Compare BE-8101CBN - Indexable Boring Bar Bit CBN Tipped Positive Rake Bit for tooling that uses a positive rake cutter tip. CBN is second in hardness to diamond and can withstand extremely high temperatures making it long lasting verses carbide. The BE-8101 insert is used on Blind Hole Tool Holders... MSRP: Now: $49.84 Compare Flat Head Screw 4-40 Flat Head Screw for KW-1474 Tool Holder MSRP: Now: $0.75 Add to Cart Compare Flat Head Screw 6-32 Flat Head Screw for Most tooling that uses the BE-1120 and most tooling that uses the BE-8101 Cutter Tips These will NOT work on tolling with .2 on the end of the part number. For example, Part Number VN-1135 takes this screw. Part number VN-1135.2 does... MSRP: Now: $0.89 Add to Cart Compare Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
BE-2119 - Indexable Boring Bar Bit BE-2119Positive Rake bit with 3 cutting tips for use with VN-999 Tool Holders MSRP: Now: $9.30 Add to Cart Compare BE-8101 - Indexable Boring Bar Bit BE-8101Premium Carbide Positive Rake Bit for tooling that uses a positive rake cutter tip.Used on Blind Hole and some Cylinder Boring Tool Holders. MSRP: Now: $9.18 Add to Cart Compare BE-8101CBN - Indexable Boring Bar Bit CBN Tipped Positive Rake Bit for tooling that uses a positive rake cutter tip. CBN is second in hardness to diamond and can withstand extremely high temperatures making it long lasting verses carbide. The BE-8101 insert is used on Blind Hole Tool Holders... MSRP: Now: $49.84 Compare Flat Head Screw 4-40 Flat Head Screw for KW-1474 Tool Holder MSRP: Now: $0.75 Add to Cart Compare Flat Head Screw 6-32 Flat Head Screw for Most tooling that uses the BE-1120 and most tooling that uses the BE-8101 Cutter Tips These will NOT work on tolling with .2 on the end of the part number. For example, Part Number VN-1135 takes this screw. Part number VN-1135.2 does... MSRP: Now: $0.89 Add to Cart Compare Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
BE-8101 - Indexable Boring Bar Bit BE-8101Premium Carbide Positive Rake Bit for tooling that uses a positive rake cutter tip.Used on Blind Hole and some Cylinder Boring Tool Holders. MSRP: Now: $9.18 Add to Cart Compare BE-8101CBN - Indexable Boring Bar Bit CBN Tipped Positive Rake Bit for tooling that uses a positive rake cutter tip. CBN is second in hardness to diamond and can withstand extremely high temperatures making it long lasting verses carbide. The BE-8101 insert is used on Blind Hole Tool Holders... MSRP: Now: $49.84 Compare Flat Head Screw 4-40 Flat Head Screw for KW-1474 Tool Holder MSRP: Now: $0.75 Add to Cart Compare Flat Head Screw 6-32 Flat Head Screw for Most tooling that uses the BE-1120 and most tooling that uses the BE-8101 Cutter Tips These will NOT work on tolling with .2 on the end of the part number. For example, Part Number VN-1135 takes this screw. Part number VN-1135.2 does... MSRP: Now: $0.89 Add to Cart Compare Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
BE-8101CBN - Indexable Boring Bar Bit CBN Tipped Positive Rake Bit for tooling that uses a positive rake cutter tip. CBN is second in hardness to diamond and can withstand extremely high temperatures making it long lasting verses carbide. The BE-8101 insert is used on Blind Hole Tool Holders... MSRP: Now: $49.84 Compare Flat Head Screw 4-40 Flat Head Screw for KW-1474 Tool Holder MSRP: Now: $0.75 Add to Cart Compare Flat Head Screw 6-32 Flat Head Screw for Most tooling that uses the BE-1120 and most tooling that uses the BE-8101 Cutter Tips These will NOT work on tolling with .2 on the end of the part number. For example, Part Number VN-1135 takes this screw. Part number VN-1135.2 does... MSRP: Now: $0.89 Add to Cart Compare Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
Flat Head Screw 4-40 Flat Head Screw for KW-1474 Tool Holder MSRP: Now: $0.75 Add to Cart Compare Flat Head Screw 6-32 Flat Head Screw for Most tooling that uses the BE-1120 and most tooling that uses the BE-8101 Cutter Tips These will NOT work on tolling with .2 on the end of the part number. For example, Part Number VN-1135 takes this screw. Part number VN-1135.2 does... MSRP: Now: $0.89 Add to Cart Compare Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
Flat Head Screw 6-32 Flat Head Screw for Most tooling that uses the BE-1120 and most tooling that uses the BE-8101 Cutter Tips These will NOT work on tolling with .2 on the end of the part number. For example, Part Number VN-1135 takes this screw. Part number VN-1135.2 does... MSRP: Now: $0.89 Add to Cart Compare Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
Kwik Way Counter Bore Boring Bar Bit Counter Bore / Sleeve Trimming Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
Kwik Way Finishing Boring Bar Bit New Finishing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Finishing Bit MSRP: Now: $29.97 Add to Cart Compare Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
Kwik Way Roughing Boring Bar Bit Roughing Bit for Kwik Way Model FS, FR, FW, FT, FN, and FL boring Bars..312 Dia. 1 1/8" in Length. Roughing Bit MSRP: Now: $29.97 Add to Cart Compare Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
Rottler Boring Bar - Counter Boring / Sleeve Trimming Rottler Counterbore / Sleeve Trimming Bit11/32" Dia. MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
Rottler Boring Bar Bit 1-1/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 1/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
Rottler Boring Bar Bit 1-3/4"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 3/4" MSRP: Now: $24.75 Add to Cart Compare Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
Rottler Boring Bar Bit 1-7/16"- Cylinder Boring Rottler Boring Bit11/32" Dia. x 1 7/16" MSRP: Now: $24.75 Add to Cart Compare Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
Torx Head Screw M3 X 10 Torx Head Screw for tooling that has a part number ending with .2 Example, Old Number: VN-1135 takes BE-632375 New Number:VN-1135.2 takes BE-M3X10 MSRP: Now: $0.89 Add to Cart Compare Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
Van Norman Boring Bar Bit Bit for Van Norman Portable Boring Bars..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
Van Norman Boring Bar Bit 1/4" Shank for Early 900 Series Bars Bit for Van Norman Portable Boring Bars..250 Diameter x 5/8 Length MSRP: Now: $34.32 Add to Cart Compare Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
Van Norman Boring Bar Bit for the 888 & 999 Boring Bar Boring Bar bit for Van Norman 888 and 999 portable boring bars7/16 Dia x 1 1/8" in length MSRP: Now: $57.30 Add to Cart Compare Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected ×
Van Norman Counter Bore Boring Bar Bit This bit is used to cut down sleeves flush with the top of the cylinder block..375 Diameter x 7/8 Length MSRP: Now: $34.32 Add to Cart Compare Compare Selected