Block Rebuilding - Cylinder Boring - Kwik Way F-FL-FN-FR-FT-FW Boring Bar Tooling - Beam Equipment & Supplies LLC

Shop by Brand

BEAM

Neway

Sioux

Sunnen

Kwik Way

Van Norman

Black & Decker

Berco

Storm Vulcan

Winona Van Norman

View all Brands

BEAM

Neway

Sioux

Sunnen

Kwik Way

Van Norman

Black & Decker

Berco

Storm Vulcan

Winona Van Norman

View all Brands

Tooling for the Kwik Way Model F, FL, FN, FR, FS, FT, & FW and FW-II Boring Bars

sku: KW-053-0361-55

#1 Centering Finger Set for Kwik Way FL

MSRP:

Now: $156.00

Out of stock Compare
sku: KW-062-0361-33

#1 Centering Finger Set for Kwik Way FN

MSRP:

Now: $156.00

Out of stock Compare
sku: KW-053-0362-52

#2 Centering Finger Set for Kwik Way FL

MSRP:

Now: $156.00

Add to Cart Compare
sku: KW-062-0362-30

#2 Centering Finger Set for Kwik Way FN

MSRP:

Now: $156.00

Out of stock Compare
sku: KW-053-0363-50

#3 Centering Finger Set for Kwik Way FL

MSRP:

Now: $156.00

Add to Cart Compare
sku: KW-062-0363-38

#3 Centering Finger Set for Kwik Way FN

MSRP:

Now: $156.00

Add to Cart Compare
sku: KW-053-0364-57

#4 Centering Finger Set for Kwik Way FL

MSRP:

Now: $156.00

Add to Cart Compare
sku: KW-062-0364-35

#4 Centering Finger Set for Kwik Way FN

MSRP:

Now: $156.00

Add to Cart Compare
sku: KW-053-0365-54

#5 Centering Finger Set for Kwik Way FL

MSRP:

Now: $156.00

Add to Cart Compare
sku: KW-062-0365-24

#5 Centering Finger Set for Kwik Way FN

MSRP:

Now: $156.00

Add to Cart Compare
sku: KW-053-0366-51

#6 Centering Finger Set for Kwik Way FL

MSRP:

Now: $164.00

Add to Cart Compare
sku: KW-062-0366-30

#6 Centering Finger Set for Kwik Way FN

MSRP:

Now: $156.00

Add to Cart Compare
sku: KW-SET-0317-19

Bit holder Plunger Set

MSRP:

Now: $90.22

Add to Cart Compare
sku: KW-071-0243-19

Lapping Fixture Adapter Block for Kwik Way

MSRP:

Now: $70.18

Add to Cart Compare
sku: KW-062-0317-19

Long Bit holder Plunger

MSRP:

Now: $52.40

Add to Cart Compare
sku: KW-057-1286-07

Portable Boring Bar Parallel Bar Set for Kwik Way 1291 Stand

MSRP:

Now: $242.00

Add to Cart Compare
sku: KW-057-0317-19

Short Bit holder Plunger

MSRP:

Now: $47.85

Add to Cart Compare
sku: KW-A610.4

Tool Holder - 60 Degree Cylinder Chamfering - 2.100"

MSRP:

Now: $119.95

Add to Cart Compare
sku: KW-B610.4

Tool Holder - 60 Degree Cylinder Chamfering - 2.562"

MSRP:

Now: $122.95

Add to Cart Compare
sku: KW-C610.4

Tool Holder - 60 Degree Cylinder Chamfering - 3.00"

MSRP:

Now: $126.95

Add to Cart Compare
sku: KW-D610.4

Tool Holder - 60 Degree Cylinder Chamfering - 3.625"

MSRP:

Now: $131.95

Add to Cart Compare
sku: KW-80A.2

Tool Holder - Blind Hole Boring - 2.062"

MSRP:

Now: $136.95

Add to Cart Compare
sku: KW-80B.3

Tool Holder - Blind Hole Boring - 2.625"

MSRP:

Now: $138.95

Add to Cart Compare
sku: KW-80C

Tool Holder - Blind Hole Boring - 3.062"

MSRP:

Now: $138.95

Add to Cart Compare
sku: KW-A111C.4

Tool Holder - Counter Bore / Sleeve Trimming - 2.100"

MSRP:

Now: $119.95

Add to Cart Compare
sku: KW-B111C.4

Tool Holder - Counter Bore / Sleeve Trimming - 2.562"

MSRP:

Now: $122.95

Add to Cart Compare
sku: KW-C111C.4

Tool Holder - Counter Bore / Sleeve Trimming - 3.000"

MSRP:

Now: $126.95

Add to Cart Compare
sku: KW-D111C.4

Tool Holder - Counter Bore / Sleeve Trimming - 3.625"

MSRP:

Now: $131.95

Add to Cart Compare
sku: KW-A210.4

Tool Holder - Cylinder Boring - 2.100" / 6 Cutting Edges

MSRP:

Now: $119.95

Add to Cart Compare
sku: KW-B210.4

Tool Holder - Cylinder Boring - 2.562" / 6 Cutting Edges

MSRP:

Now: $122.95

Add to Cart Compare
sku: KW-C210.4

Tool Holder - Cylinder Boring - 3.00" / 6 Cutting Edges

MSRP:

Now: $126.95

Add to Cart Compare
sku: KW-D210.4

Tool Holder - Cylinder Boring - 3.625" / 6 Cutting Edges

MSRP:

Now: $131.95

Add to Cart Compare

#1 Centering Finger Set for Kwik Way FL

#1 Centering Finger Set for the Kwik Way FL Boring Bars. This set measures .312 Diameter By @ 1.345" Length

MSRP:

Now: $156.00
Out of stock Compare
#1 Centering Finger Set for Kwik Way FN

#1 Centering Finger Set for the Kwik Way FN Boring Bars. This set measures .312 Diameter By @ 1.200" Length

MSRP:

Now: $156.00
Out of stock Compare
#2 Centering Finger Set for Kwik Way FL

#2 Centering Finger Set for the Kwik Way FL Boring Bars. This set measures .312 Diameter By @ 1.730" Length

MSRP:

Now: $156.00
Add to Cart Compare
#2 Centering Finger Set for Kwik Way FN

#2 Centering Finger Set for the Kwik Way FN Boring Bars. This set measures .312 Diameter By @ 1.425" Length

MSRP:

Now: $156.00
Out of stock Compare
#3 Centering Finger Set for Kwik Way FL

#3 Centering Finger Set for the Kwik Way FL Boring Bars. This set measures .312 Diameter By @ 2.105" Length

MSRP:

Now: $156.00
Add to Cart Compare
#3 Centering Finger Set for Kwik Way FN

#3 Centering Finger Set for the Kwik Way FN Boring Bars. This set measures .312 Diameter By @ 1.640" Length

MSRP:

Now: $156.00
Add to Cart Compare
#4 Centering Finger Set for Kwik Way FL

#4 Centering Finger Set for the Kwik Way FL Boring Bars. This set measures .312 Diameter By @ 2.480" Length

MSRP:

Now: $156.00
Add to Cart Compare
#4 Centering Finger Set for Kwik Way FN

#4 Centering Finger Set for the Kwik Way FN Boring Bars. This set measures .312 Diameter By @ 1.860" Length

MSRP:

Now: $156.00
Add to Cart Compare
#5 Centering Finger Set for Kwik Way FL

#5 Centering Finger Set for the Kwik Way FL Boring Bars. This set measures .312 Diameter By @ 2.855" Length

MSRP:

Now: $156.00
Add to Cart Compare
#5 Centering Finger Set for Kwik Way FN

#5 Centering Finger Set for the Kwik Way FN Boring Bars. This set measures .312 Diameter By @ 2.080" Length

MSRP:

Now: $156.00
Add to Cart Compare
#6 Centering Finger Set for Kwik Way FL

#6 Centering Finger Set for the Kwik Way FL Boring Bars. This set measures .312 Diameter By @ 3.225" Length

MSRP:

Now: $164.00
Add to Cart Compare
#6 Centering Finger Set for Kwik Way FN

#6 Centering Finger Set for the Kwik Way FN Boring Bars. This set measures .312 Diameter By @ 2.300" Length

MSRP:

Now: $156.00
Add to Cart Compare
Bit holder Plunger Set

Set of 2 Bit Holder Spring Loaded Plunger Assemblies for Kwik Way Boring bars1 Short @ 1 1/16 Overall Length1 Long @ 1 1/2" Overall LengthDiameter is 5/16"

MSRP:

Now: $90.22
Add to Cart Compare
Lapping Fixture Adapter Block for Kwik Way

Lapping Fixture Adapter Block for Kwik Way

MSRP:

Now: $70.18
Add to Cart Compare
Long Bit holder Plunger

Long Bit Holder Spring Loaded Plunger Assembly for Kwik Way Boring barsOverall length is @1.5".These are made to fit in a tool holder with 5/16" hole.

MSRP:

Now: $52.40
Add to Cart Compare
Portable Boring Bar Parallel Bar Set for Kwik Way 1291 Stand

Set of Parallel Bars for use with portable boring bar stands. This set is for a Kwik Way 1291 stand but may work with other stand. the over all length is 9 inchs and they will fit on a table that is 1-5/8" thick.

MSRP:

Now: $242.00
Add to Cart Compare
Short Bit holder Plunger

Short Bit Holder Spring Loaded Plunger Assembly for Kwik Way Boring barsOver All Length is @ 1 1/16" including plunger pin. Diameter is 5/16"

MSRP:

Now: $47.85
Add to Cart Compare
Tool Holder - 60 Degree Cylinder Chamfering - 2.100"

2.100" Length (5/8" Wide x 5/8" Tall) for chamfering the top of the cylinder on a 60 Degree Angle. Short Indexable bit for Kwik Way Boring Bar Models: FW, FR, & FS Replacement Cutter Tip with 3 cutting edges: BE-1119 (1-...

MSRP:

Now: $119.95
Add to Cart Compare
Tool Holder - 60 Degree Cylinder Chamfering - 2.562"

2.562" Length (5/8" Wide x 5/8" Tall) for chamfering the top of the cylinder on a 60 Degree Angle. Short Indexable bit for Kwik Way Boring Bar Models: FL, FN, FT, and FLong Indexable bit for Kwik Way Boring Bar Models: FW, FR, and...

MSRP:

Now: $122.95
Add to Cart Compare
Tool Holder - 60 Degree Cylinder Chamfering - 3.00"

3.00" Length (5/8" Wide x 5/8" Tall) for chamfering the top of the cylinder on a 60 Degree Angle. Medium Indexable bit for Kwik Way Boring Bar Model: FLLong Indexable bit for Kwik Way Boring Bar Models: FN, FT, and F Replacement...

MSRP:

Now: $126.95
Add to Cart Compare
Tool Holder - 60 Degree Cylinder Chamfering - 3.625"

3.625" Length (5/8" Wide x 5/8" Tall) for chamfering the top of the cylinder on a 60 Degree Angle. Long Indexable bit for Kwik Way Boring Bar Model: FL Replacement Cutter Tip with 3 cutting edges: BE-1119 (1- included with tool...

MSRP:

Now: $131.95
Add to Cart Compare
Tool Holder - Blind Hole Boring - 2.062"

2-1/16"" Length (5/8" Wide x 5/8" Tall) for boring blind hole cylinders(front of cutter is stepped down so it can cut to to the bottom of a cylinder without boring bar head bottoming out). Indexable bit Holder For Kwik Way Boring Bar...

MSRP:

Now: $136.95
Add to Cart Compare
Tool Holder - Blind Hole Boring - 2.625"

2-5/8" Length (5/8" Wide x 5/8" Tall) for boring blind hole cylinders(front of cutter is stepped down so it can cut to to the bottom of a cylinder without boring bar head bottoming out). Indexable Blind Hole Bit Holder For Kwik Way Boring Bar...

MSRP:

Now: $138.95
Add to Cart Compare
Tool Holder - Blind Hole Boring - 3.062"

3-1/16" Length (5/8" Wide x 5/8" Tall) for boring blind hole cylinders(front of cutter is stepped down so it can cut to to the bottom of a cylinder without boring bar head bottoming out). Indexable bit Holder For Kwik Way Boring Bar...

MSRP:

Now: $138.95
Add to Cart Compare
Tool Holder - Counter Bore / Sleeve Trimming - 2.100"

2.100" Length (5/8" Wide x 5/8" Tall) For cutting sleeve Counter Bore or Trimming down a sleeve flush with the deck. Short Indexable bit for Kwik Way Boring Bar Models: FW, FR, & FS Replacement Cutter Tip with 3 cutting...

MSRP:

Now: $119.95
Add to Cart Compare
Tool Holder - Counter Bore / Sleeve Trimming - 2.562"

2.562" Length (5/8" Wide x 5/8" Tall) For cutting sleeve Counter Bore or Trimming down a sleeve flush with the deck. Short Indexable bit for Kwik Way Boring Bar Models: FL, FN, FT, and FLong Indexable bit for Kwik Way Boring...

MSRP:

Now: $122.95
Add to Cart Compare
Tool Holder - Counter Bore / Sleeve Trimming - 3.000"

3.00" Length (5/8" Wide x 5/8" Tall) For cutting sleeve Counter Bore or Trimming down a sleeve flush with the deck. Medium Indexable bit for Kwik Way Boring Bar Model: FL Long bit for Kwik Way Boring Bar Models: FN, FT, and...

MSRP:

Now: $126.95
Add to Cart Compare
Tool Holder - Counter Bore / Sleeve Trimming - 3.625"

3.625" Length (5/8" Wide x 5/8" Tall) For cutting sleeve Counter Bore or Trimming down a sleeve flush with the deck. Long Indexable bit for Kwik Way Boring Bar Models: FL Replacement Cutter Tip with 3 cutting edges: BE-1119 (1-...

MSRP:

Now: $131.95
Add to Cart Compare
Tool Holder - Cylinder Boring - 2.100" / 6 Cutting Edges

2.100" Length (5/8" Wide x 5/8" Tall)Short Indexable bit for Kwik Way Boring Bar Models: FW, FR, & FS Replacement Cutter Tip with 6 cutting edges: BE-1120 (1- included with tool holder) Replacement Tip Screw: BE-3MX10 (1-...

MSRP:

Now: $119.95
Add to Cart Compare
Tool Holder - Cylinder Boring - 2.562" / 6 Cutting Edges

2.562" Length (5/8" Wide x 5/8" Tall)Short Indexable bit for Kwik Way Boring Bar Models: FL, FN, FT, and FLong Indexable bit for Kwik Way Boring Bar Models: FW, FR, and FS Replacement Cutter Tip with 6 cutting edges: BE-1120 (1-...

MSRP:

Now: $122.95
Add to Cart Compare
Tool Holder - Cylinder Boring - 3.00" / 6 Cutting Edges

3.00" Length (5/8" Wide x 5/8" Tall)Medium Indexable bit for Kwik Way Boring Bar Model: FLLong Indexable bit for Kwik Way Boring Bar Models: FN, FT, and F Replacement Cutter Tip with 6 cutting edges: BE-1120 (1- included with tool...

MSRP:

Now: $126.95
Add to Cart Compare
Tool Holder - Cylinder Boring - 3.625" / 6 Cutting Edges

3.625" Length (5/8" Wide x 5/8" Tall)Long Indexable bit for Kwik Way Boring Bar Model: FL Replacement Cutter Tip with 6 cutting edges: BE-1120 (1- included with tool holder) Replacement Tip Screw: BE-3MX10 (1- included with tool holder) For...

MSRP:

Now: $131.95
Add to Cart Compare

Compare Selected