Product Description
Tool Holder - 60`Cylinder Chamfering - 2.250"
2.250" Length (.435" Wide x .590" Tall(11mm x 15mm))
Used for chamfering the top of the cylinder on a 60 degree angle.
Indexable bit for Kwik Way Boring Bar Models: FWS, FWSII, & FX
- Replacement Cutter Tip with 3 cutting edges: BE-8101 (1- included with tool holder)
- Replacement Tip Screw: BE-3MX10 (1- included with tool holder)
- For use with 5/16" Spring Loaded Plunger: KW-057-0317-19 (not included with tool holder)
- Made from Precision Ground Hardened Tool Steel
- MADE IN THE USA
